Welcome to LookChem.com Sign In | Join Free
Home > Products > m-bromoanisole msds

m-bromoanisole msds

m-bromoanisole msds provided by Beijng Wisdom Chemicals Co., Ltd.
  • Product Details
  • Company Profile

    1. Introduction of m-bromoanisole

    m-bromoanisole (CAS NO.2398-37-0) which is a colorless to slight yellow clear liquid is a Aromatics Compounds; Tramadol; Aromatics. This chemical is stable and combustible. m-bromoanisole is incompatible with strong oxidising agents and strong acids reducing agents. What's more, it can be used in organic synthesis. There are plenty of standards of this product, m-bromoanisole 99.5%min is the best standard.

    2. m-bromoanisole msds

    This m-bromoanisole msds is provided by the Beijng Wisdom Chemicals Co., Ltd who is in the Fine Chemical Market since 10 years. It can provide the m-bromoanisole 99.5%min to you timely besause it is the chemical which is manufactured by itself.

    Section 1 - Chemical Product and Company Identification

    MSDS Name: m-bromoanisole, 99.5%min
    Synonyms: 1-Bromo-3-methoxybenzene

    Section 2 - Composition, Information on Ingredients

    CAS# Chemical Name Percent  EINECS/ELINCS 
    2398-37-0 m-bromoanisole 99.5%min 219-264-5

     
    Section 3 - Hazards Identification  

    EMERGENCY OVERVIEW:
    Caution! May cause eye and skin irritation. May cause respiratory and digestive tract irritation. The toxicological properties of this material have not been fully investigated.
    Target Organs: None known.

    Potential Health Effects:
    Eye: May cause eye irritation. The toxicological properties of this material have not been fully investigated. 
    Skin: May cause skin irritation. The toxicological properties of this material have not been fully investigated. 
    Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
    The toxicological properties of this substance have not been fully investigated. 
    Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. 
    Chronic: No information found. 

    Section 4 - First Aid Measures 

    Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develo ps, get medical aid. 
    Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Get medical aid if symptoms occur. 
    Ingestion: Never give anything by mouth to an unconscious person. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
    Get medical aid if irritation or symptoms occur. 
    Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear. 
    Notes to Physician: Treat symptomatically and supportively.  

    Section 5 - Fire Fighting Measures

    General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
    During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool.
    Containers may explode in the heat of a fire. 
    Extinguishing Media: In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Cool containers with flooding quantities of water until well after fire is out. 
    Flash Point: 98 deg C ( 208.40 deg F) 
    Autoignition Temperature: Not available. 
    Explosion Limits, Lower:N/A 
    Upper: N/A 
    NFPA Rating: Not published. 

    Section 6 - Accidental Release Measures 

    General Information: Use proper personal protective equipment as indicated in Section 8.

    Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

    Section 7 - Handling and Storage 

    Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. 
    Storage: Store in a cool, dry place. Keep container closed when not in use. 

    Section 8 - Exposure Controls, Personal Protection 

    Engineering Controls: Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.

    Personal Protective Equipment 
    Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. 
    Skin: Wear appropriate gloves to prevent skin exposure.
    Clothing: Wear appropriate protective clothing to minimize contact with skin. 

    Section 9 - Physical and Chemical Properties

    Physical State: Liquid 
    Appearance: clear very slight brown 
    Odor: None reported. 
    pH: Not available. 
    Vapor Pressure: Not available. 
    Vapor Density: Not available. 
    Evaporation Rate:Not available. 
    Viscosity: Not available. 
    Boiling Point: 210.0 - 211.0 deg C @ 760.00m 
    Freezing/Melting Point:2 deg C 
    Decomposition Temperature:Not available. 
    Solubility: Not available.
    Specific Gravity/Density:1.4770g/cm3
    Molecular Formula:C7H7BrO 
    Molecular Weight:187.04

    Section 10 - Stability and Reactivity 

    Chemical Stability: Stable under normal temperatures and pressures. 
    Conditions to Avoid: Incompatible materials, excess heat, strong acids, strong oxidants. 
    Incompatibilities with Other Materials: Strong oxidizing agents - strong acids. 
    Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide. 
    Hazardous Polymerization: Has not been reported. 

    Section 11 - Toxicological Information

    RTECS#:      
    CAS# 2398-37-0 unlisted. 
    LD50/LC50:
    Not available.
     
    Carcinogenicity:

    CAS# 2398-37-0: Not listed by ACGIH, IARC, NTP, or CA Prop 65

    Epidemiology: No information available. 
    Teratogenicity: No information available. 
    Reproductive Effects: No information available. 
    Mutagenicity: No information available. 
    Neurotoxicity: No information available. 
    Other Studies: 

    Section 12 - Ecological Information 

    No information available.

    Section 13 - Disposal Considerations 

    Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. 

    Section 14 - Transport Information 

    No information available.

    Section 15 - Regulatory Information 

    Hazard Symbols: XI 
    Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. 
    Safety Phrases: S 24/25 Avoid contact with skin and eyes.

    Section 16 - Additional Information  
     
    MSDS Creation Date: 3/18/1998 
    Revision #3 Date: 10/03/2005  
     
    The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall INDO GULF GROUP be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if INDO GULF GROUP has been advised of the possibility of such damages.

Verified Supplier

Escrow ServiceMore
Secure Your Orders With escrow More Transparency,Less Uncertainty

Send a message direct to supplier(s)

*From:
Enter email or Member ID
To:
Beijing Wisdom Chemicals Co., Ltd.
Subject:
*Message:

-Enter between 20 to 2000 letters.English only. Word count:0 letter(s).
-We suggest you include in your inquiry a brief introduction to your company as well as your product requirements
 

Related products