Trimethoxysilane msds
- Product Details
- Company Profile
Trimethoxysilane msds information is provided by WD Silicone, which has become a major manufacturer of silane coupling agents in China, as well as a leading company for silane-related technology development, support and transform.
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name: Trimethoxysilane
CAS No. 2487-90-3
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Flammable liquids (Category 2)
Acute toxicity, Inhalation (Category 1)
Eye irritation (Category 2)
According to European Directive 67/548/EEC as amended.
Highly flammable. Very toxic by inhalation. Irritating to eyes.
Danger
(1).Highly flammable liquid and vapour.
Causes serious eye irritation.
Fatal if inhaled.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wear respiratory protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
(2).Highly flammable
Very toxic
(3).Highly flammable.
Very toxic by inhalation.
Irritating to eyes.
Keep away from sources of ignition - No smoking.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
3. COMPOSITION/INFORMATION ON INGREDIENTS
Formula: C3H10O3Si
Molecular Weight: 122,2 g/mol
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing give artificial respiration Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires,
apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray;
solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous
earth, vermiculite) and place in container for disposal according to local / national regulations (see section
13).
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Moisture sensitive.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Hand protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Handle with gloves.
Eye protection
Face shield and safety glasses
Skin and body protection
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Hygiene measures
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
9. STABILITY AND REACTIVITY
Chemical stability: Stable under recommended storage conditions.
Conditions to avoid
Heat, flames and sparks.
Materials to avoid
Strong oxidizing agents, Strong acids, Strong bases
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, silicon oxides
10. TOXICOLOGICAL INFORMATION
Acute toxicity
LD50 Oral - rat - 8.929 mg/kg
LD50 Inhalation - rat - 4 h - 42 ppm
LD50 Dermal - rabbit - 6.029 mg/kg
Skin corrosion/irritation
Skin - rabbit - Mild skin irritation - 24 h
Serious eye damage/eye irritation
Eyes - rabbit - Moderate eye irritation - 24 h
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
11. DISPOSAL CONSIDERATIONS
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Observe all federal, state, and local environmental regulations. Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
Verified Supplier
WD Silicone Co., Ltd
- Country: China (Mainland)
- Year Established: 2000
- Business License:
- Business type: Trading Company
- Integral:
Contact Details|Similar Products
Escrow ServiceMore
Secure Your Orders With escrow More Transparency,Less Uncertainty