If you want to buy chlorodifluoroacetic acid(CAS 76-04-0), Nantong Baokai Chemical Co., Ltd provides chlorodifluoroacetic acid 99.0%. And the information of chlorodifluoroacetic acid msds is offered by this company.
 

1. PRODUCT AND COMPANY IDENTIFICATION
Product name: Chlorodifluoroacetic acid
Comany name: Nantong Baokai Chemical Co., Ltd

2. HAZARDS IDENTIFICATION
Emergency Overview
OSHA Hazards: Corrosive
Other hazards which do not result in classification: Lachrymator.
Signal word: Danger 
Reactivity Hazard:
Potential Health Effects
Inhalation: May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract.
Skin: May be harmful if absorbed through skin. Causes skin burns.
Eyes: Causes eye burns. Causes severe eye burns.
Ingestion: May be harmful if swallowed. 

3. COMPOSITION/INFORMATION ON INGREDIENTS
Formula: C₂HClF₂O₂
Molecular Weight: 130.48 g/mol
 
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.Continue rinsing eyes during
transport to hospital.
If swallowed
Do not induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a
physician.

5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.

6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate
personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for
disposal.

7. HANDLING AND STORAGE
Precautions for safe handling
Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed
and kept upright to prevent leakage.   

 
8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose
combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the
respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components
tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching
glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in
accordance with applicable laws and good laboratory practices. Wash and dry hands.

Eye protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved
under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of
workday.

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form: clear, liquid
Colour: brown
Melting point: 20 - 23 °C (68 - 73 °F) - lit.
Boiling point: 122 °C (252 °F) - lit.
Density: 1.54 g/cm3 at 25 °C (77 °F)

10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Materials to avoid
Strong oxidizing agents, Strong bases
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Hydrogen chloride gas, Hydrogen
fluoride

11. TOXICOLOGICAL INFORMATION
Inhalation: May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper  respiratory tract.
Ingestion: May be harmful if swallowed
Skin: May be harmful if absorbed through skin. Causes skin burns.
Eyes: Causes eye burns. Causes severe eye burns.
Signs and Symptoms of Exposure
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., Cough,
Shortness of breath, Headache, Nausea

12. DISPOSAL CONSIDERATIONS
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste
disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a
chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

13. TRANSPORT INFORMATION
DOT (US)
UN-Number: 3261 Class: 8 Packing group: II
Proper shipping name: Corrosive solid, acidic, organic, n.o.s. (Chlorodifluoroacetic acid)
Marine pollutant: No
Poison Inhalation Hazard: No

IMDG
UN-Number: 3261 Class: 8 Packing group: II EMS-No: F-A, S-B
Proper shipping name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (Chlorodifluoroacetic acid)
Marine pollutant: No

IATA
UN-Number: 3261 Class: 8 Packing group: II
Proper shipping name: Corrosive solid, acidic, organic, n.o.s. (Chlorodifluoroacetic acid)