- A cautionary note on the use of p-nitrobenzenesulfonamides as protecting groups
-
The cleavage of p-nitrobonzenesulfonamides using thiolate was found to give poor regioselectivity. Cleavage requires addition of thiolate at the sulfonamide carbon, but some addition occurs at the nitro carbon resulting in simple displacement of the nitro group rather than sulfonamide cleavage. The side reaction is most prevalent with cyclic amines and steric effects play only a limited role. This lack of regioselectivity is not observed for o- nitrobenzenesulfonamides.
- Wuts,Northuis
-
-
Read Online
- Modulation of photochemical oxidation of thioethers to sulfoxides or sulfones using an aromatic ketone as the photocatalyst
-
We have developed an eco-friendly and chemo-selective photocatalytic synthesis of sulfoxides or sulfones via oxidation of sulfides (thioethers) at ambient temperature using air or O2 as the oxidant. An inexpensive thioxanthone was used as the photocatalyst. Our method offers excellent chemical yields and good functional group tolerance. The hydrogen bonding between hexafluoro-2-propanol (HFIP) and sulfoxides may play an important role in minimizing the over-oxidization of sulfoxides.
- Zhao, Bin,Hammond, Gerald B.,Xu, Bo
-
supporting information
(2021/09/13)
-
- Highly active mesoionic chalcogenone zinc(II) derivatives for C-S cross-coupling reactions
-
The first mesoionic heavier chalcogenones, L1-L3 [L1 = 1-(2-mesitylene)-3-methyl-4-phenyltriazolin-5-selone; L2 = 1-(2-mesitylene)-3-methyl-4-phenyltriazolin-5-thione; L3 = 1-(benzyl)-2-3(methyl)-4-phenyltriazolin-5-selone], were isolated and characterised. Density functional theory was used to obtain insights into the σ donor and π accepting nature of mesoionic chalcogenones. Using these new ligands, a series of the first zinc(ii) mesoionic chalcogenone complexes were isolated. Three mono nuclear zinc(ii) chalcogenone complexes, [(L1)Zn(Cl)2(HOMe)] (1), [(L2)Zn(Cl)2(HOMe)] (3) and [(L2)Zn(Br)2(HOMe)] (4), and two dinuclear zinc complexes, [(L1)Zn(Br)(μ2-Br)]2 (2) and [(L3)Zn(Br)(μ2-Br)]2 (5), containing mesoionic thione and selone ligands were synthesized and characterised. These new complexes 1-5 represent the first structurally characterized mesoionic chalcogenone supported metal derivatives. Furthermore, all zinc complexes were characterized by thermogravimetric analysis and UV-vis spectroscopy. The solid-state structures of all zinc complexes were determined by single-crystal X-ray diffraction. The catalytic activities of the zinc(ii) complexes in thioetherification reactions were investigated without scrubbing of oxygen. The scope of the catalytic reactions was explored with a wide range of thiophenols and aryl halides. The diaryl thioethers were obtained in very good yield under mild conditions. The present protocol furnishes a synthetic route for the C-S cross-coupling of thiophenols and aryl halides without scrubbing oxygen and moisture.
- Vaddamanu, Moulali,Prabusankar, Ganesan,Velappan, Kavitha
-
p. 129 - 140
(2019/12/26)
-
- Bimetallic BaMoO4 nanoparticles for the C-S cross-coupling of thiols with haloarenes
-
We disclosed new bimetallic BaMoO4 nanoparticles for the C-S cross-coupling reaction. The C-S cross-coupling reaction of alkyl/aryl thiols with haloarenes was accomplished with high yields. The reaction has good functional group tolerance and selectivity. This is an efficient protocol for synthesizing the building blocks of pharmaceuticals containing C-S bonds. The catalyst is recyclable. The unactivated bromo- and 4-acetyl fluoro-arenes can well couple to afford thioethers in high yields. The reaction is believed to proceed by oxidative addition and reductive elimination.
- Panda, Subhalaxmi,Sahu, Santosh Kumar,Behera, Pradyota Kumar,Panigrahi, Reba,Garnaik, Bamakanta,Rout, Laxmidhar
-
supporting information
p. 2500 - 2504
(2020/02/20)
-
- CuMoO4 Bimetallic Nanoparticles, An Efficient Catalyst for Room Temperature C?S Cross-Coupling of Thiols and Haloarenes
-
CuII catalyst is less efficient at room temperature for C?S cross-coupling. C?S cross-coupling by CuII catalyst at room temperature is not reported; however, doping of copper with molybdenum metal has been realized here to be more efficient for C?S cross-coupling in comparison to general CuII catalyst. The doped catalyst CuMoO4 nanoparticle is found to be more efficient than copper. The catalyst works under mild conditions without any ligand at room temperature and is recyclable and effective for a wide range of thiols and haloarenes (ArI, ArBr, ArF) from milligram to gram scale. The copper-based bimetallic catalyst is developed and recognized for C?S cross-coupling of haloarenes with alkyl and aryl thiols.
- Panigrahi, Reba,Sahu, Santosh Kumar,Behera, Pradyota Kumar,Panda, Subhalaxmi,Rout, Laxmidhar
-
p. 620 - 624
(2019/12/27)
-
- Exploration of the mechanism and scope of the CuI/DABCO catalysed C–S coupling reaction
-
A cost effective and easily available CuI/DABCO catalytic system has been developed for the C–S cross-coupling reaction. This method is extremely useful for the thioetherification of aryl and heteroaryl halides, providing excellent yields and good chemoselectivity. We have also explored the mechanism of the reaction using DFT studies.
- Thomas, Anns Maria,Sherin,Asha, Sujatha,Manojkumar,Anilkumar, Gopinathan
-
supporting information
(2019/12/26)
-
- Pd (II) immobilized on clinoptilolite as a highly active heterogeneous catalyst for ullmann coupling-type s-arylation of thiols with aryl halides
-
Background: There are a number of protocols for Ullmann coupling–type S-arylation reactions, many of them suffer from the use of homogenous and often corrosive catalyst, cumbersome workup procedures, and long reaction times. Besides, many of these reagents are expensive and non-recoverable, leading to the generation of a large amount of toxic waste particularly when large-scale applications are considered. Objective: The aim of this study was to prepare a new Pd catalyst bonded on the surface of zeolite as a heterogeneous catalyst. Methods: A heterogeneous palladium catalyst has been prepared by immobilizing Pd ions on Clinoptilolite. This novel developed heterogeneous catalyst was thoroughly examined for Ullmann coupling–type S-arylation reaction using different bases, solvents and 0.003 mg of the catalyst. The structural and morphological characterizations of the catalyst were carried out using XRD, TGA, BET and TEM techniques. Results: Highly efficient heterogeneous palladium catalyst has been developed by immobilizing Pd ions on Clinoptilolite, as one of the most abundant naturally occurring zeolites for Ullmann S-arylation. By using this method, we provide an efficient way to a wide variety of substituted thiolic compounds. Moreover, the catalyst is easily recovered using simple filtration and reused for 5 consecutive runs. Conclusion: In this effort, we developed a new Pd catalyst bonded on the surface of zeolite as a substrate to prepare the heterogeneous catalyst. We demonstrate that this novel catalyst offers reliable and convincing data that may offer a valuable application in further developing the science and technology of Ullmann reaction protocols and allied industries. Additionally, the catalyst was reusable and kept its high activities over a number of cycles.
- Alizadeh, Abdollah,Khalilzadeh, Mohammad A.,Alipour, Eskandar,Zareyee, Daryoush
-
p. 657 - 666
(2020/08/24)
-
- X-ray structurally characterized Mo (VI), Fe (III) and Cu (II) complexes of amide-imine conjugate: (bio)catalytic and histidine recognition studies
-
An amide-imine conjugate, (E)-N′-((2-hydroxybenzen-1-yl) methylene)-4-methylbenzohydrazide (H2LPTASAL), derived from 4-methyl-benzoic acid hydrazide (PTA) and 2-hydroxybenzaldehyde is used to prepare Mo (VI), Cu (II) and Fe (III) complexes. The X-ray structurally characterized complexes have been explored as catalyst for amine assisted asymmetric ring opening (ARO) of epoxide, carbon-heteroatom cross-coupling and ethyl benzene oxidation. In addition, their catecholase like activities have thoroughly been investigated. Moreover, the Cu (II) complex selectively recognizes histidine by fluorescence spectroscopy.
- Ta, Sabyasachi,Ghosh, Milan,Salam, Noor,Das, Jayanta,Islam, Manirul,Brand?o, Paula,Félix, Vítor,Sanmartin, Jesus,Das, Debasis
-
-
- Palladium complex containing meta-position carborane triazole ligand and preparation method and application of palladium complex
-
The invention relates to a palladium complex containing a meta-position carborane triazole ligand and a preparation method and application of the palladium complex. The palladium complex is prepared by the following steps: (1) dropwise adding an n-BuLi solution into a meta-position carborane m-C2B10H12 solution, carrying out stirring and reacting, then adding 3-propargyl bromide for a reaction again, and after the reaction is finished, carrying out separating to obtain 1,3-dipropargyl meta-carborane; and (2) under the catalytic condition of a catalyst CuI, carrying out a reaction on 1,3-dipropargyl meta-carborane and aryl azide, then adding PdCl2 into a reaction system, continuing the reaction, and after the reaction is finished, carrying out separation to obtain the palladium complex containing the meta-carborane triazole ligand. Compared with the prior art, the preparation method provided by the invention is simple and green; the complex can efficiently catalyze a coupling reaction of mercaptan and halogenated hydrocarbon to synthesize thioether compounds; reaction conditions are mild, substrate universality is good, catalytic efficiency is high, and few byproducts are produced;and the catalyst has high stability and is not sensitive to air and water.
- -
-
Paragraph 0041-0043
(2020/08/07)
-
- HETEROCYCLIC COMPOUNDS FOR THE TREATMENT OF EPILEPSY
-
The present invention provides a novel heterocyclic compound represented by Formula [I] and a salt thereof: wherein the symbols are as defined in the specification, which is useful for treating, preventing and/or diagnosing seizure and the like in disease involving epileptic seizure or convulsive seizure (including multiple drug resistant seizure, refractory seizure, acute symptomatic seizure, febrile seizure and status epilepticus), as well as a medical use therefor.
- -
-
Paragraph 0134; 0143; 0144
(2020/06/19)
-
- Synthesis of thioethers, arenes and arylated benzoxazoles by transformation of the C(aryl)-C bond of aryl alcohols
-
Transformation of aryl alcohols into high-value functionalized aromatic compounds by selective cleavage and functionalization of the C(aryl)-C(OH) bond is of crucial importance, but very challenging by far. Herein, for the first time, we report a novel and versatile strategy for activation and functionalization of C(aryl)-C(OH) bonds by the cooperation of oxygenation and decarboxylative functionalization. A diverse range of aryl alcohol substrates were employed as arylation reagents via the cleavage of C(aryl)-C(OH) bonds and effectively converted into corresponding thioether, arene, and arylated benzoxazole products in excellent yields, in a Cu based catalytic system using O2 as the oxidant. This study offers a new way for aryl alcohol conversion and potentially offers a new opportunity to produce high-value functionalized aromatics from renewable feedstocks such as lignin which features abundant C(aryl)-C(OH) bonds in its linkages.
- Chen, Bingfeng,Han, Buxing,Liu, Mingyang,Meng, Qinglei,Song, Jinliang,Zhang, Pei,Zhang, Zhanrong
-
p. 7634 - 7640
(2020/08/14)
-
- Homoleptic and heteroleptic Zn(ii) selone catalysts for thioetherification of aryl halides without scrubbing oxygen
-
Five new mononuclear tetra-coordinated zinc(ii) selones, [Zn(L1)2Cl2] (1), [Zn(L1)2Br2] (2), [{Zn(L2)4}{BF4}2] (3), [{Zn(L2)4}{ClO4}2] (4), and [Zn(L2)2Br2] (5), have been isolated from a one-pot reaction between the corresponding zinc(ii) salt and selone ligand, 1-methyl 3-naphthylmethylimidazoline-2-selone (L1) or 1-isopropyl 3-methylimidazoline-2-selone (L2). All these complexes were characterized by CHN analysis, FT-IR, NMR studies, and single-crystal X-ray crystallography techniques. The Zn(ii) center in 1-5 exhibits a distorted tetrahedral geometry. Besides, 1-5 were employed as catalysts in the thioetherification of aryl halides. The first zinc(ii) catalyst-mediated thioetherification of aryl halides without scrubbing oxygen was demonstrated. Catalysts 1-5 are highly active towards the cross-coupling reaction between aryl halides and thiophenols. The catalytic ability of 1-5 was explored in THF, toluene, and CH3CN solvents with different bases such as K2CO3, Cs2CO3, and NaOtBu. Interestingly, the zinc(ii) center attached to two selone ligands is much more catalytically active than that attached to four selone ligands.
- Vaddamanu, Moulali,Velappan, Kavitha,Prabusankar, Ganesan
-
p. 3574 - 3583
(2020/03/17)
-
- An Iodide-Mediated Transition-Metal-Free Strategy towards Unsymmetrical Diaryl Sulfides via Arylhydrazines and Thiols
-
A mild, scalable iodine-mediated oxidative cross-coupling reaction of arylhydrazines and thiols for construction of thioethers (sulfides) in the absence of any transition metals or photocatalysts is disclosed. A variety of unsymmetrical diaryl sulfides with broad substrate scope both on thiols and hydrazines were synthesized in high yields in water at room temperature. Furthermore, to demonstrate the utility of the protocol, the above C-S bond formation was applied in the synthesis of the key structure of vortioxetine as an antidepressant drug. The gram-scale outcome also added to the potential utility of this protocol.
- Asadpour, Mohammad,Azizzade, Meysam,Ghasemi, Mehran,Jafarpour, Farnaz,Rajai-Daryasarei, Saideh
-
supporting information
p. 727 - 734
(2020/02/25)
-
- Anionic Bismuth(III) chloride cluster with diselenide countercations: Application in C-S cross coupling reactions
-
The first weakly coordinating anion (WCA) with reactive p-block cation (rPBC) type of [(Bi4Cl16)4-{(LSeSeL)2+}2], L = 1,3-bis(2-benzhydryl-4,6-dimethylphenyl)-1H-imidazole-2(3H), ion pair is reported. The tetranuclear anionic bismuth(III) cluster shows a new type of ladder structure with two different types of Bi(III) coordination modes. In the solid state structure, the tetranuclear bismuth(III) cluster is sandwiched by two diselenide cations through hydrogen bonding interactions. Besides, this ion pair has been efficaciously employed as catalyst in C-S cross-coupling reactions under optimized reaction condition. This ion pair depicted a wide range of substrate scope with different thiols and aryl halides.
- Ganesan, Prabusankar,Mannem, Adinarayana,Muthukumaran, Nirmala
-
supporting information
p. 29 - 35
(2019/02/08)
-
- Achieving Nickel Catalyzed C-S Cross-Coupling under Mild Conditions Using Metal-Ligand Cooperativity
-
A simple and efficient approach of C-S cross-coupling of a wide variety of (hetero)aryl thiols and (hetero)aryl halides under mild conditions, mostly at room temperature, catalyzed by well-defined singlet diradical Ni(II) catalysts bearing redox noninnocent ligands is reported. Taking advantage of ligand centered redox events, the high-energetic Ni(0)/Ni(II) or Ni(I)/Ni(III) redox steps were avoided in the catalytic cycle. The cooperative participation of both nickel and the coordinated ligands during oxidative addition/reductive elimination steps allowed us to perform the catalytic reactions under mild conditions.
- Sikari, Rina,Sinha, Suman,Das, Siuli,Saha, Anannya,Chakraborty, Gargi,Mondal, Rakesh,Paul, Nanda D.
-
p. 4072 - 4085
(2019/04/01)
-
- New arylselanylpyrazole-copper catalysts: Highly efficient catalytic system for C–Se and C–S coupling reactions
-
We describe herein the use of arylselanylpyrazole–copper complexes as versatile catalysts for C–Se and C–S coupling reactions. The performance of these complexes for C–Se reactions was investigated in chalcogenoacetylene synthesis. The reactions were carried out under mild and aerobic conditions and afforded selanylalkynes bearing a variety of electron-withdrawing and electron-donating groups. The performance of these catalysts for C–S coupling was investigated through the reaction of aryl halides with thiols and products were obtained in moderate to excellent yields. A plausible mechanism for selenoacetylene synthesis is also suggested, and the 77Se NMR results show that these arylselanylpyrazole ligands act as hemilabile ligands. High-resolution mass spectrometry was used to investigate the intermediates and also to corroborate the proposed catalytic cycle.
- Coelho, Felipe Lange,Dresch, Lucielle Codeim,Stieler, Rafael,Campo, Leandra Franciscato,Schneider, Paulo Henrique
-
-
- Cerium catalyst promoted C-S cross-coupling: Synthesis of thioethers, dapsone and RN-18 precursors
-
In this work, we present a novel, efficient and green methodology for the synthesis of thioethers by the C-S cross-coupling reaction with the assistance of [Ce(l-Pro)2]2Ox as a heterogeneous catalyst in good to excellent yields. A scale-up of the protocol was explored using an unpublished methodology for the synthesis of a dapsone-precursor, which proved to be very effective over a short time. The catalyst [Ce(l-Pro)2]2Ox was recovered and it was shown to be effective for five more reaction cycles.
- Tavares Junior, José M. Da C.,Da Silva, Caren D. G.,Dos Santos, Beatriz F.,Souza, Nicole S.,De Oliveira, Aline R.,Kupfer, Vicente L.,Rinaldi, Andrelson W.,Domingues, Nelson L. C.
-
supporting information
p. 10103 - 10108
(2019/12/23)
-
- Copper(II)-faciliated synthesis of substituted thioethers and 5-substituted 1H-tetrazoles: Experimental and theoretical studies
-
Benzoylhydrazine based Schiff base-ligated two new copper(II) complexes, [Cu(L1)2] (1) and [Cu(L2)2] (2) were synthesized by the reaction of Cu(CH3COO)2·H2O with respective Schiff base ligand 1-[(4-nitrophenyl)ethylidene] benzohydrazide (HL1) or 1-[(4-methoxyphenyl)ethylidene] benzohydrazide (HL2). Both complexes were isolated as greenish solid and fully characterized by elemental analysis, FT-IR, EPR, thermo-gravimetric (TG) analysis and Cyclic Voltammetry. The molecular structures of both complexes have also been determined by single crystal X-ray crystallography, which confirmed the coordination of Schiff base ligands through N, O donor atoms and distorted square planar geometry around the Cu(II) ion. Both complexes were found to be good homogeneous catalysts for the synthesis of a wide range of substituted thioethers and 5-substituted 1H-tetrazoles in 92% and 93% yield, respectively, at a low catalyst loading (0.5 mol%). The bond angles and distances, as discerned from the DFT calculations, commusurated with the experimental findings. The energy difference between the HOMO and the LUMO, calculated from DFT studies, was found to be 5.645 eV and 6.459 eV for complex 1 and complex 2, respectively. These results are in harmony with the observed higher catalytic activity of complex 1.
- Layek, Samaresh,Agrahari, Bhumika,Dey, Shuvankar,Ganguly, Rakesh,Pathak, Devendra D.
-
p. 194 - 206
(2019/06/24)
-
- An efficient protocol for the synthesis of thioethers via iron-catalyzed cross-coupling reaction and its mechanistic investigation
-
One of the most straightforward methods for the synthesis of diaryl sulfides is the transition metal catalyzed C–S coupling reaction. Herein we report a study on the iron-catalyzed protocol for cross-coupling reaction of aryl halides with thiols. Structurally diverse diaryl sulfides were prepared efficiently by using a catalyst system involving cheap and environment-friendly FeCl3 and non-toxic universal ligand L-proline. The reaction mechanism for the iron-catalyzed C–S coupling reaction was investigated by means of density functional theory (DFT) methods on a model system. The calculations were performed using hybrid PBE1PBE functional in conjugation with the LANL-2DZ basis set. The key step involved in the mechanism is the formation of a reactant complex in which both reactants are electrostatically bound to Fe(III) proline complex catalyst. The elimination of HI occurs with a much lower TS energy (20.0 kcal/mol) than the uncatalyzed reaction (44.7 kcal/mol).
- Sindhu,Abi,Mathai, George,Anilkumar, Gopinathan
-
p. 270 - 276
(2018/11/26)
-
- CoII immobilized on an aminated magnetic metal-organic framework catalyzed C-N and C-S bond forming reactions: A journey for the mild and efficient synthesis of arylamines and arylsulfides
-
In this work, we report a simple and versatile method for the modification of a metal-organic framework (NH2-MIL53(Al)) in a step-wise manner. To characterize the synthesized nanostructured catalyst, a variety of spectroscopic and microscopic techniques including FT-IR, XRD, BET, TEM, FE-SEM, EDX, EDX-mapping, TGA, XPS, VSM, ICP-OES and CHN have been employed. Fe3O4@AMCA-MIL53(Al)-NH2-CoII NPs, which benefit from small nanocrystalline size (10-30 nm, according to the XRD and TEM data) in combination with the coexistence of magnetic nanoparticles, a metal-organic framework, and cobalt species, were found to be an excellent environment catalyst to promote the C-N and C-S cross coupling reactions. A wide range of functional substrates including electron-withdrawing and electron-donating aryl halides underwent the coupling reaction with aromatic/heteroaromatic/benzylic and aliphatic amines and sulfides. The results demonstrated that the yields of the target products were good to excellent and the catalyst can be recycled for at least seven recycling runs without a discernible decrease in its catalytic activity. Furthermore, the heterogeneity studies (such as hot filtration and poisoning tests) efficiently confirmed that the as-synthesized nanostructured catalyst is heterogeneous and completely stable under the reaction conditions. We hope that our study inspires more interest in designing novel catalysts based on using low-cost metal ions (such as cobalt) in the field of cross coupling reactions.
- Mohammadinezhad, Arezou,Akhlaghinia, Batool
-
p. 15525 - 15538
(2019/10/19)
-
- Aryldithiocarbamates as thiol alternatives in Cu-catalyzed C(aryl)-S coupling reactions using aryldiazonium tetrafluoroborate salts
-
An efficient method for the synthesis of unsymmetrical diaryl sulfides has been developed by the C-S cross coupling of aryldithiocarbamates and aryldiazonium salts in the presence of CuI-2,2′-bipyridine and Zn. Aryldithiocarbamate compounds have been used here as thiol substitutes. The protocol shows wide substrate scope and good yields of the products.
- Dutta, Soumya,Saha, Amit
-
p. 9360 - 9366
(2019/11/13)
-
- Syntheses of Thioethers and Selenide Ethers from Anilines
-
In this study, a general procedure was proposed for synthesizing thioethers and selenide ethers from anilines under solvent-free and transition-metal-free conditions. Thioethers were formed when anilines reacted with thiols under blue light-emitting-diode (LED) irradiation at room temperature without a photocatalyst. When reactions were performed using anilines and diselenides, the corresponding selenide ethers were obtained with satisfactory to excellent yields. The reaction was performed under photocatalyst-free and solvent-free conditions without blue LEDs. The advantages of this system include convenient operations, mild reaction conditions, satisfactory functional group tolerance, and late-stage selenylation of drug molecules.
- Shieh, Yi-Chen,Du, Kai,Basha, R. Sidick,Xue, Yung-Jing,Shih, Bo-Hao,Li, Liang,Lee, Chin-Fa
-
p. 6223 - 6231
(2019/05/24)
-
- NiFe2O4 as a magnetically recoverable nanocatalyst for odourless C–S bond formation via the cleavage of C–O bond in the presence of S8 under mild and green conditions
-
We present green methodologies for one-pot and odourless syntheses of unsymmetric and symmetric diaryl sulfides via C─O bond activation using NiFe2O4 magnetic nanoparticles as a reusable heterogeneous nanocatalyst. The synthesis of unsymmetric sulfides is performed using the cross-coupling reaction of phenolic esters such as acetates, triflates and tosylates with arylboronic acid/S8 or triphenyltin chloride/S8 as thiolating agents in the presence of base and NiFe2O4 magnetic nanoparticles as a catalyst in poly(ethylene glycol) as solvent at 60–85°C. Also, the synthesis of symmetric diaryl sulfides from phenolic compounds using S8 as the sulfur source and NiFe2O4 as catalyst in dimethylformamide at 120°C is described. Using these protocols, the syntheses of various unsymmetric and symmetric sulfides become easier than using the available protocols due to the use of a magnetically reusable bimetallic nanocatalyst and avoiding the use of thiols and aryl halides.
- Atashkar, Bahareh,Rostami, Amin,Rostami, Abed,Zolfigol, Mohammad Ali
-
-
- Visible-light-promoted organic dye-catalyzed sulfidation and phosphorylation of arylhydrazines toward aromatic sulfides and diarylphosphoryl hydrazides
-
Visible-light-promoted sulfidation and phosphorylation of arylhydrazines for the synthesis of aromatic sulfides and diarylphosphoryl hydrazides were developed using the organic dyes rose bengal and Na2-eosin Y as photocatalysts, respectively. This strategy offers an efficient and mild transition-metal-free synthetic protocol for the formation of C-S and N-P bonds from arylhydrazines.
- Li, Rui,Shi, Tao,Chen, Xiao-Lan,Lv, Qi-Yan,Zhang, Yin-Li,Peng, Yu-Yu,Qu, Ling-Bo,Yu, Bing
-
supporting information
p. 13642 - 13646
(2019/09/06)
-
- Method for synthesizing asymmetric sulfide from molecular oxygen oxidation water phase under catalysis of water-soluble transition metal compound
-
Aiming at problems that in the prior art organic solvent pollution can be caused and a great number of reaction byproducts are generated when asymmetric sulfides are prepared, the invention disclosesa method for synthesizing an asymmetric sulfide from a molecular oxygen oxidation water phase under catalysis of a water-soluble transition metal compound. The method comprises the following steps: dispersing a sulfydryl compound and a hydrazine compound as substrates in a mole ratio of 1:1 into an alkali solution, and at 40-100 DEG C, in the presence of oxygen, and with a water-soluble transitionmetal compound as a catalyst, stirring to carry out reactions, thereby obtaining the asymmetric sulfide. By adopting the method, molecular oxygen is adopted as an oxidant, and water is adopted as a solvent, so that an organic solvent is avoided, a high yield can be achieved, and the problem of byproducts can be generally avoided.
- -
-
Paragraph 0091
(2019/07/29)
-
- Surfactant-Type Catalyst for Aerobic Oxidative Coupling of Hydrazine with Thiol in Water
-
A series of PEG-functionalized nitrogen ligands were developed to conduct an aerobic oxidative cross-coupling reaction between alkyl- or aryl-hydrazines with thiols in water. This surfactant-type catalyst enables high efficiencies and selectivities, while tolerating a large variety of functional groups. The mother liquor is still catalytically active after five runs.
- Ren, Xuanhe,Tang, Shanyu,Li, Longjia,Li, Jiao,Liang, Helong,Li, Ganzhong,Yang, Guanyu,Li, Heng,Yuan, Bingxin
-
p. 8683 - 8690
(2019/07/08)
-
- Diaryl sulfide compounds and preparation method thereof
-
The invention discloses diaryl sulfide compounds and a preparation method thereof. The method uses an organic dye as a photosensitizer, an equivalent weight of an oxidant is added, an aryl hydrazine and a diaryl disulfide are used as reactants, dimethyl sulfoxide is used as a solvent, a temperature is controlled at 25-45 DEG C, a reaction is performed for 5-12 h under visible light irradiation, column chromatography separation is performed, and therefore the product sulfide compounds are obtained. The invention provides the novel method for synthesizing the diaryl sulfide target compounds by using the cheap readily-available aryl hydrazine and diaryl disulfide compounds as starting raw materials for the first time. The method provided by the invention has the advantages of mild reaction conditions, simple operation and the like, and can also conveniently synthesize the asymmetric diaryl sulfide compounds; in drug synthesis, a metal catalyst is difficult to remove, so that drug production and applications are limited; therefore, in the method provided by the invention, the metal-free catalytic system shows huge potential application value.
- -
-
Paragraph 0018; 0019
(2019/05/15)
-
- Synthesis and nano-Pd catalyzed chemoselective oxidation of symmetrical and unsymmetrical sulfides
-
A highly chemoselective, efficient and nano-Pd catalyzed protocol for the rapid construction of sulfoxides and sulfones via the oxidation of symmetrical and unsymmetrical sulfides using H2O2 as an oxidant has been developed, respectively. The ready availability of starting materials, easy recovery and reutilization of the catalyst, wide substrate scope, and high yields make this protocol an attractive alternative. The process also involves the metal-free and microwave-promoted synthesis of symmetrical diarylsulfides, and FeCl3-mediated preparation of symmetrical diaryldisulfides through the reaction of arenediazonium tetrafluoroborates with Na2S·9H2O as a sulfur source. In addition, unsymmetrical sulfides were generated via the K2CO3-mediated reaction of arenediazonium tetrafluoroborates with symmetrical disulfides.
- Li, Xing,Du, Jia,Zhang, Yongli,Chang, Honghong,Gao, Wenchao,Wei, Wenlong
-
p. 3048 - 3055
(2019/03/21)
-
- Cu(I)-PNF, an organic-based nanocatalyst, catalyzed C-O and C-S cross-coupling reactions
-
Peptide nanofiber has been prepared via a self-assembly protocol and decorated with Cu(I) to prepare a nanostructural catalyst. The catalytic activity of this prepared nanomaterial (Cu(I)-PNF) was examined in C-O and C-S cross-coupling reactions. Compared with conventional copper-ligand catalytic systems, CuNP-PNF has unique advantages such as water solubility, high efficiency, and low cost, which makes it a highly efficient and beneficial catalyst to reuse in cross-coupling reactions.
- Taherinia, Zahra,Ghorbani-Choghamarani, Arash
-
-
- Synthesis of diaryl sulfides via nickel ferrite-catalysed C─S bond formation in green media
-
NiFe2O4 magnetic nanoparticles (MNPs) were synthesized, characterized and applied as an air-stable, inexpensive and magnetically separable nanocatalyst for the synthesis of structurally diverse sulfides. Efficient methodologies were developed for the synthesis of unsymmetric diaryl sulfides via odourless and one-pot reactions of triphenyltin chloride/S8 or arylboronic acid/S8 as thiolating agents with aryl halides or nitroarenes as starting materials in the presence of base (K2CO3 or NaOH) and NiFe2O4 MNPs as a catalyst in water or poly (ethylene glycol) as solvent at 80–110?°C. Free from ligand and the unpleasant smell of thiols and with the use of magnetically reusable nanocatalyst, green solvents and commercially available and cheap sulfur source and starting materials, these methods are more eco-friendly and practical than available protocols for the synthesis of sulfides.
- Farzin, Shiva,Rahimi, Abdollah,Amiri, Kamran,Rostami, Abed,Rostami, Amin
-
-
- Merging visible-light photoredox and micellar catalysis: Arylation reactions with anilines nitrosated in situ
-
An aqueous photocatalytic system was designed by merging visible-light photoredox catalysis with micellar catalysis. Eosin B, an organic dye, was utilized as the photocatalyst, and Triton X-100 was employed as the surfactant; both are inexpensive and commercially available. This clean and energy-saving catalytic system enables photocatalytic reactions of the diazonium ion generated in situ to proceed smoothly in water without any co-solvents or additives at room temperature.
- Bu, Mei-Jie,Lu, Guo-Ping,Jiang, Jianzhong,Cai, Chun
-
p. 3728 - 3732
(2018/08/12)
-
- Recyclable imidazolium ion-tagged nickel catalyst for microwave-assisted C-S cross-coupling in water using sulfonyl hydrazide as the sulfur source
-
Herein, we report the facile and convenient synthesis of aryl sulfides through the sulfenylation of aryl halides with arylsulfonyl hydrazides, which is catalyzed by a simple and water-soluble Ni(ii) complex. The nickel complex based on the imidazolium ion-tagged salen architecture is synthesized and well characterized using various analytical techniques. The green solvent water is used as the solvent medium and moderate to good yields of aryl sulfides are obtained using 5 mol% of the catalyst under microwave irradiation. The incorporation of the ion-tag functionality helps in the recycling of the catalyst and successful reuse for up to five runs without appreciable change in its activity.
- Saini, Vaishali,Khungar, Bharti
-
p. 12796 - 12801
(2018/08/04)
-
- A Novel Method for the Direct Synthesis of Symmetrical and Unsymmetrical Sulfides and Disulfides from Aryl Halides and Ethyl Potassium Xanthogenate
-
An efficient and new method for the synthesis of disulfides and sulfides via the reaction of aryl halides with ethyl potassium xanthogenate in the presence of MOF-199 is described. O -Ethyl- S -aryl carbonodithioate has a key role as an intermediate in this procedure; it was converted into symmetrical diaryl disulfides in DMF. Additionally, this could be applied to the synthesis of unsymmetrical aryl alkyl(aryl′) disulfides by the reaction with S -alkyl(aryl) sulfurothioates (Bunte salts) as well as unsymmetrical aryl alkyl(aryl′) sulfides in DMSO.
- Soleiman-Beigi,Arzehgar
-
p. 986 - 992
(2018/02/09)
-
- Nano CoCuFe2O4-catalyzed coupling reaction of arylboronic acid with amines and thiols: An atom-economic and ligand-free route to access unsymmetrical amines and sulfides
-
An efficient protocol was developed for the nano CoCuFe2O4-catalyzed C-N and C-S bond formation. By this catalytic system, both amine and sulfide-based structural motifs were formed efficiently in aryl halide-free route. The amination reaction of phenyl boronic acid with various types of amines was conducted under ligand-free conditions, in ethanol as a green solvent at 60°C. Unsymmetrical diaryl/aryl alkyl sulfide synthesis via the coupling reaction of arylboronic acids with thiols was also conducted. The nano cobalt-copper ferrite was used as a heterogenous efficient, inexpensive, magnetically separable and recyclable catalyst that can be used for several cycles.
- Moghaddam, Firouz Matloubi,Pourkaveh, Raheleh,Gholamtajari, Milad
-
-
- Palladium-Catalyzed Oxidative Cross-Coupling of Arylhydrazines and Arenethiols with Molecular Oxygen as the Sole Oxidant
-
A highly efficient palladium-catalyzed oxidative cross-coupling of arylhydrazines and arenethiols with molecular oxygen as the sole oxidant to afford unsymmetrical diaryl sulfides has been developed. The only byproducts are nitrogen and water. A broad range of functional groups, even the reactive iodides, are tolerated and thus offer the opportunity for further functionalization.
- Wang, Changliu,Zhang, Zhenming,Tu, Yongliang,Li, Ying,Wu, Jiale,Zhao, Junfeng
-
p. 2389 - 2394
(2018/02/23)
-
- Ferromagnetic nanoparticle-supported copper complex: A highly efficient and reusable catalyst for three-component syntheses of 1,4-disubstituted 1,2,3-triazoles and C–S coupling of aryl halides
-
A new nanocatalyst was synthesized by immobilization of 4′-(4-hydroxyphenyl)-2,2′:6′,2″-terpyridine/CuI complex on ferromagnetic nanoparticles through a surface modification (FMNPs@SiO2-TPy-Cu). This heterogeneous catalyst was characterized using various techniques including Fourier transform infrared and energy-dispersive X-ray spectroscopies, transmission and scanning electron microscopies, X-ray diffraction, vibrating sample magnetometry and thermogravimetric analysis. The resulting nanocatalyst presented excellent catalytic activity for the regioselective syntheses of 1,4-disubstituted 1,2,3-triazoles and thioethers. The thermally and chemically stable, benign and economical catalyst was easily recovered using an external magnet and reused in at least five successive runs without an appreciable loss of activity.
- Khodaei, Mohammad Mehdi,Bahrami, Kiumars,Meibodi, Farhat Sadat
-
-
- Room-Temperature Arylation of Thiols: Breakthrough with Aryl Chlorides
-
The formation of aryl C?S bonds is an important chemical transformation because aryl sulfides are valuable building blocks for the synthesis of biologically and pharmaceutically active molecules and organic materials. Aryl sulfides have traditionally been synthesized through the transition-metal-catalyzed cross-coupling of aryl halides with thiols. However, the aryl halides used are usually bromides and iodides; readily available, low-cost aryl chlorides often not reactive enough. Furthermore, the deactivation of transition-metal catalysts by thiols has forced chemists to use high catalyst loadings, specially designed ligands, high temperatures, and/or strong bases, thus leading to high costs and the incompatibility of some functional groups. Herein, we describe a simple and efficient visible-light photoredox arylation of thiols with aryl halides at room temperature. More importantly, various aryl chlorides are also effective arylation reagents under the present conditions.
- Jiang, Min,Li, Haifang,Yang, Haijun,Fu, Hua
-
supporting information
p. 874 - 879
(2017/01/14)
-
- CuI/Oxalic Diamide-Catalyzed Cross-Coupling of Thiols with Aryl Bromides and Chlorides
-
We report a general copper-catalyzed cross-coupling of thiols with aryl halides by using N-aryl-N′-alkyl oxalic diamide (L3) or N,N′-dialkyl oxalic diamide (L5) as the ligand. Both aryl and alkyl thiols can be coupled with unactivated aryl bromides and chlorides to give the desired products in good yields. Furthermore, this system features a broad substrate scope and good tolerance of functional groups. Importantly, the oxalic diamides are stable and can be prepared easily from commercially available and cheap starting materials.
- Chen, Chia-Wei,Chen, Yi-Ling,Reddy, Daggula Mallikarjuna,Du, Kai,Li, Chao-En,Shih, Bo-Hao,Xue, Yung-Jing,Lee, Chin-Fa
-
supporting information
p. 10087 - 10091
(2017/08/01)
-
- Formation of C-C, C-S and C-N bonds catalysed by supported copper nanoparticles
-
Transition-metal catalysed cross-coupling reactions are still dominated by palladium chemistry. Within the recent past, copper has gained ground against palladium by virtue of its cheaper price and equivalent function in certain reactions. Four catalysts consisting of copper nanoparticles on zeolite, titania, montmorillonite and activated carbon have been tested in three palladium- and ligand-free cross-coupling reactions to form carbon-carbon, carbon-sulfur and carbon-nitrogen bonds. CuNPs/zeolite has been found to be the best one in the Sonogashira reaction of aryl iodides and arylacetylenes, as well as in the coupling of aryl halides with aryl and alkyl thiols, being reusable in both cases. However, the arylation of nitrogen-containing heterocycles (imidazole, pyrazole, benzimidazole and indole) has been better accomplished with CuNPs/titania, albeit CuNPs/activated carbon showed better recycling properties. The catalytic activity of the nanostructured catalysts has been compared with that of twelve commercial copper catalysts, with the former outperforming the latter in the three types of reactions studied.
- Mitrofanov, Alexander Yu.,Murashkina, Arina V.,Martín-García, Iris,Alonso, Francisco,Beletskaya, Irina P.
-
p. 4401 - 4412
(2017/10/13)
-
- Cu2O/SiC as efficient catalyst for Ullmann coupling of phenols with aryl halides
-
A Cu2O/SiC heterogeneous catalyst was prepared via a two-step liquid-phase method using diethylene glycol as both the solvent and the reducing agent. The catalyst was characterized using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and H2 temperature-programmed reduction. All the results indicate that Cu is present on the SiC support primarily as Cu2O. The SEM and TEM results show that cubic Cu2O nanoparticles are uniformly dispersed on the β-SiC surface. The reaction conditions, namely the temperature, reaction time, and amounts of base and catalyst used, for the Ullmann-type C–O cross-coupling reaction were optimized. A model reaction was performed using iodobenzene (14.0 mmol) and phenol (14.0 mmol) with Cu2O/SiC (5 wt% Cu) as the catalyst, Cs2CO3 (1.0 equiv.) as the base, and tetrahydrofuran as the solvent at 150 °C for 3 h; a yield of 97% was obtained and the turnover frequency (TOF) was 1136 h?1. The Cu2O/SiC catalyst has a broad substrate scope and can be used in Ullmann-type C–O cross-coupling reactions of aryl halides and phenols bearing a variety of different substituents. The catalyst also showed high activity in the Ullmann-type C–S cross-coupling of thiophenol with iodobenzene and substituted iodobenzenes; a TOF of 1186 h?1 was achieved. The recyclability of the Cu2O/SiC catalyst in the O-arylation of phenol with iodobenzene was investigated under the optimum conditions. The yield decreased from 97% to 64% after five cycles. The main reason for the decrease in the catalyst activity is loss of the active component, i.e., Cu2O.
- Wang, Yibing,Guo, Xiaoning,Lü, Manqian,Zhai, Zhaoyang,Wang, Yingyong,Guo, Xiangyun
-
p. 658 - 664
(2017/04/24)
-
- Copper-Catalyzed C-S Bond Formation via the Cleavage of C-O Bonds in the Presence of S8 as the Sulfur Source
-
Useful and applicable methods for one-pot and odorless synthesis of unsymmetrical and symmetrical diaryl sulfides via C-O bond activation are presented. First, a new efficient procedure for the synthesis of unsymmetrical sulfides using the cross-coupling reaction of phenolic esters such as acetates, tosylates, and triflates and with arylboronic acid or triphenyltin chloride as the coupling partners is reported. Depending on the reaction, S 8 /KF or S 8 /NaO t -Bu system is found to be an effective source of sulfur in the presence of copper salts and in poly(ethylene glycol) as a green solvent. Then, the synthesis of symmetrical diaryl sulfides from phenolic compounds by using S 8 as the sulfur source and NaO t -Bu in anhydrous DMF at 120 °C under N 2 is described. By these protocols, the synthesis of a variety of unsymmetrical and symmetrical sulfides become easier than the available protocols in which thiols and aryl halides are directly used for the preparation of the sulfides.
- Rostami, Abed,Rostami, Amin,Ghaderi, Arash,Gholinejad, Mohammad,Gheisarzadeh, Sajedeh
-
p. 5025 - 5038
(2017/10/06)
-
- Iron-catalyzed carbon–sulfur bond formation: Atom-economic construction of thioethers with diaryliodonium salts
-
Diaryliodonium salts are characterized by poor atom economy with the formation of one equivalent of an iodoarene as waste. We have developed an atom-economic iron-catalyzed protocol for the synthesis of a variety of thioethers with diaryliodonium salts. Not only cyclic diaryliodonium salts but also linear diaryliodonium salts were found to perform well in the reactions.
- Liu, Li,Qiang, Jian,Bai, Shuhua,Li, Yang,Li, Jian
-
p. 2365 - 2371
(2017/09/30)
-
- Synthesis of a new monomer for sulfonated poly(arylene ether sulfones)
-
4-({2,4-Bis[(4-chlorophenyl)sulfonyl]phenyl}thio)benzenesulfonic acid was synthesized based on the scheme suggested from the results of retrosynthetic analysis. This compound is a new monomer for the preparation of sulfonated poly(arylene ether sulfones) used as a solid polymer electrolyte in fuel cells. The structure of the aromatic disulfone containing a sulfo group was suggested based on the data on the influence of chemical structure of structural elements of polysulfone proton-conducting membranes on their operational characteristics.
- Begunov,Valyaeva,Fakhrutdinov,Pirogova
-
p. 545 - 551
(2017/09/15)
-
- Copper nanoparticles supported on polyaniline-functionalized multiwall carbon nanotubes: An efficient and recyclable catalyst for synthesis of unsymmetric sulfides using potassium ethyl xanthogenate in water
-
A new and powerful polyaniline-functionalized carbon nanotube-supported copper(II) nanoparticle catalyst was successfully prepared and evaluated as a heterogeneous catalyst for the one-pot synthesis of unsymmetric thioethers by coupling of aryl, alkyl and benzyl halides using potassium ethyl xanthogenate as source of sulfur in water. All of these reactions gave the desired products in good to excellent yields. The catalyst is available, air-stable and can be reused several times without significant loss in its catalytic activity.
- Hajipour, Abdol R.,Jajarmi, Saeideh,Khorsandi, Zahra
-
-
- CuI promoted sulfenylation of organozinc reagents with arylsulfonyl chlorides
-
A CuI promoted sulfenylation of organozinc reagents with arylsulfonyl chlorides/PPh3 has been explored. This reaction proceeded smoothly through an alkyl/aryl radical (generated from organometallics) under mild conditions and produced the desired sulfide products in excellent yields.
- Fu, Ying,Su, Yuhu,Xu, Qin-Shan,Du, Zhengyin,Hu, Yulai,Wang, Ke-Hu,Huang, Danfeng
-
p. 6018 - 6022
(2017/02/05)
-
- Iron(0) nanoparticles mediated direct conversion of aryl/heteroaryl amines to chalcogenides via in situ diazotization
-
A simple procedure for the synthesis of organo-chalcogenides has been developed by the reaction of aryl/heteroaryl amines with di-aryl/heteroaryl dichalcogenides in the presence of tBuONO and Fe(0) nanoparticles. The reaction proceeds via in situ diazotization followed by chalcogenation. A series of functionalized diaryl/aryl heteroaryl/diheteroaryl/aryl-alkyl selenides, sulfides and tellurides have been obtained by this procedure. Significantly, using this procedure 2,4-dinitroaniline is converted to (2,4-dinitrophenyl)(phenyl)selane which is known as thioredoxin reductase (TR) and glutathione reductase (GR) inhibitor. The reaction goes by a radical pathway and a plausible mechanism has been suggested.
- Panja, Subir,Maity, Pintu,Kundu, Debasish,Ranu, Brindaban C.
-
supporting information
p. 3441 - 3445
(2017/08/10)
-
- Carbon-sulphur cross coupling reactions catalyzed by nickel-based coordination polymers based on metalloligands
-
This work illustrates two Ni2+ based coordination polymers (CPs, 1-Ni and 2-Ni) synthesized using two related Co3+ based metalloligands offering appended arylcarboxylate groups. The crystal structure of 1-Ni displays a porous 3D network having well-defined major and minor pores whereas 2-Ni exhibits a somewhat densely packed structure. Both CPs supported the exchange of coordinated water molecules and the inclusion of iodine within their porous structure whereas binding studies illustrated that the Ni(ii) ion in these CPs can bind thiophenol, a reagent used in the C-S cross coupling reactions. The two CPs functioned as the reusable heterogeneous catalysts for the C-S cross coupling reactions between substituted aromatic halides and thiophenol as well as cyclohexanethiol and ethanethiol.
- Kumar, Gulshan,Hussain, Firasat,Gupta, Rajeev
-
p. 15023 - 15031
(2017/11/14)
-
- Transition-Metal-Free and Oxidant-Free Cross-Coupling of Arylhydrazines with Disulfides: Base-Promoted Synthesis of Unsymmetrical Aryl Sulfides
-
A novel synthesis of unsymmetrical aryl sulfides, which requires no transition metal catalyst and no oxidant, was developed. This base-promoted cross-coupling reaction proceeded using arylhydrazines and 1 equiv amount of disulfides under inert gas conditions to afford the unsymmetrical aryl sulfides in good yields.
- Taniguchi, Toshihide,Naka, Takuya,Imoto, Mitsutaka,Takeda, Motonori,Nakai, Takeo,Mihara, Masatoshi,Mizuno, Takumi,Nomoto, Akihiro,Ogawa, Akiya
-
p. 6647 - 6655
(2017/07/15)
-
- A Highly Efficient Copper-Catalyzed Synthesis of Unsymmetrical Diaryl- and Aryl Alkyl Chalcogenides from Aryl Iodides and Diorganyl Disulfides and Diselenides
-
An efficient and convenient protocol has been developed for the copper-catalyzed reaction of aryl iodides and diorganyl disulfides and diselenides. A variety of symmetrical and unsymmetrical diaryl- and aryl alkyl chalcogenides were synthesized with good functional group tolerance and chemoselectivity by using copper(I) iodide as a catalyst, 4′-(4-methoxyphenyl)-2,2′:6′,2′′-terpyridine as ligand, and KOH as base under an inert atmosphere.
- Movassagh, Barahman,Hosseinzadeh, Zhila
-
supporting information
p. 777 - 781
(2016/03/12)
-
- Pd-PVP-Fe (palladium-poly(N-vinylpyrrolidone)-iron) catalyzed S-arylation of thiols with aryl halides in aqueous media
-
Pd-PVP-Fe (palladium-poly(N-vinylpyrrolidone)-iron) nano catalyst catalyzes selective C–S cross-coupling (S-arylation) reactions of thiols with aryl halides and avoids the formation of S–S (disulfide) homocoupling byproducts. The reactions were carried out in aqueous media using only 0.23?mol% palladium with high selectivity and short reaction time. The effects of the Pd0and Fe0moieties on the C–S cross-coupling reaction mechanism, yield, and selectivity were investigated. The yield and selectivity can be controlled by adjusting the order of adding the reactants and catalyst into the reaction medium. The X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) microscopy, energy dispersive X-ray (EDX) spectroscopy, and thermal gravimetric analysis (TGA) tools were used to characterize the catalyst. The C–S cross-coupling reaction process could be repeated up to six times without losing effectiveness. The metals leaching of Pd-PVP-Fe nanocatalyst after reusing cycles were investigated by atomic absorption spectroscopic (AAS) and EDX spectroscopy. The nature of Pd metal after the first run of the C–S cross-coupling reaction was studied by UV–vis spectrophotometry. The morphology of bimetallic nanocatalyst after the first run of the C–S cross-coupling reaction was investigated by SEM, EBSD, and EDX microscopy.
- Ghaderi-Shekhi Abadi, Parvaneh,Rafiee, Ezzat,Joshaghani, Mohammad
-
p. 162 - 170
(2016/07/25)
-
- Polystyrene resin-supported CuI-cryptand 22 complex: a highly efficient and reusable catalyst for the formation of aryl–sulfur bonds in aqueous media
-
The air and moisture stable polystyrene resin-supported copper(I) iodide-cryptand-22 complex (PS-C22-CuI) behaves as an efficient and robust heterogeneous catalyst in the cross-coupling reaction of aryl halides and thiols in aqueous media. Moreover, the heterogeneous catalyst can be easily recovered by filtration and reused for five cycles without significant loss in activity.
- Rezaei, Nasrin,Movassagh, Barahman
-
supporting information
p. 1625 - 1628
(2018/03/29)
-